English|Chinese
Online message:
无轴支架 Shaftless Mill Roll Stand
ZJ-F Mill Roll Stand

Purpose and Characteristics:

Purpose and Characteristics:
◆Maximum paper roll diameter:φ1400mm.◆Maximum support weight:2T.
◆The structure is double rotary shaft with four arms;Support two paper mill
rolls on both arms at the same time.
◆Round-plate type manual brake,the web tension is adjusted at any time.
◆Arm Clamp and rotary structure set fixed torque clutch,operate safety.

ZJ-V5 Hydraulic Mill Roll Stand

Purpose and Characteristics:

◆ The structure is double rotary shafts with four arms;Support two
paper mill rolls on both arms at the same time.
◆ Hydraulic control for paper mill roller up-down,clamp-open andcentering.
◆ Web tension is controlled by pneumatic brake or manual brake ;
Springiness chucks are optional.
◆ Effective width:1200mm-2200mm;Maximum paper roll diameter:φ1500mm.
◆ Maximum support weight:3T.
◆ Main axis:φ242mm
ZJ-V5 Hydraulic Shaftless Mill Roll Stand

Purpose and Characteristics:

◆ The structure is double rotary shafts with four arms;Support two paper mill rolls on
both arms at the same time.
◆ Hydraulic control for paper mill roller up-down,clamp-open and centering. Or motorized
clamp-open and centering.
◆ Using multi-point brake which imports from Italy and automatic expansion
springiness chucks , Reduce paper waste
◆ Effective width:1200mm-2800mm.
◆ Maximum paper roll diameter:φ1500mm.
◆ Maximum support weight:5T.
◆ Main axis:φ270mm